Arza
Geologiki gözleg, nebit we gazy özleşdirmek, buraw suw guýulary, partlama deşikleri we seýsmiki gözleg üçin deşik ýasamak, gurluşyk in engineeringenerçiligi üçin ulanylýan trikon biti. Trikon gaýalarynyň 11 sany umumy görnüşi bar.
Polat dişler seriýasy: IADC KOD: 116,117,126,127,136,137,216,217,317,337,
TCI seriýasy: IADC KOD: 417,437,447,517,527,537,547,617,627,637,647,737,837.
TCI trikon bit, tci rolik bitler, rolik bit, polat diş rolik bit, TCI rolik bit, TCI trikon bit
1. Ölçegler 3 7/8 "26" aralygynda üýtgeýär
2. IADC kodlarynyň hemmesini diýen ýaly açýar.3. Ygtybarly hil we amatly baha
Trikon bitini saýlamak boýunça görkezme
| IADC | WOB (KN / mm) | RPM (r / min) | Ulanylýan formalar |
| 114/116/117 | 0,3 ~ 0.75 | 180 ~ 60 | Palçyk, palçyk daşy, hek we ş.m. ýaly pes gysyjy güýji we ýokary burawlylygy bilen gaty ýumşak görnüşler. |
| 124/126/127 | 0,3 ~ 0.85 | 180 ~ 60 | Palçyk daşy, gips, duz, ýumşak hek daşy we ş.m. ýaly pes gysyjy güýji we ýokary burawlylygy bilen ýumşak formasiýalar. |
| 134/135/136/137 | 0.3 ~ 0.95 | 150 ~ 60 | Pes gysyjy güýji we ýokary burawlylygy bilen ýumşak, orta ýumşak slanets, gaty gips, orta ýumşak hek daşy, orta ýumşak çäge daşy, gaty berk ýumşak görnüş we ş.m. |
| 214/215/216/217 | 0.35 ~ 0.95 | 150 ~ 60 | Orta ýumşak slanets, gaty gips, orta ýumşak hek daşy, orta ýumşak çäge daşy, has berk interfeýsli ýumşak emele geliş we ş.m. ýaly ýokary gysyş güýji bolan orta formasiýalar. |
| 227 | 0.35 ~ 0.95 | 150 ~ 50 | Abraziw slanets, hek daşy, gum daşy, dolomit, gaty gips, mermer we ş.m. ýaly ýokary gysyjy güýji bolan orta gaty formasiýalar. |
| Bellik: aboveokardaky tablisadaky WOB we RPM-iň ýokarky çäkleri bir wagtda ulanylmaly däldir. | |||
Trikon bitlerini saýlamak boýunça görkezmeTrikon dişleriniň görnüşi
Bitleriň ululygy
| Bit ölçegi | API REG PIN | Tork | Agram | |
| Inç | mm | Inç | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Taslamada TCI Tricone bit
| Iň az sargyt mukdary | N / A |
| Bahasy | |
| Gaplamak maglumatlary | Standart eksport eltiş bukjasy |
| Eltip bermegiň wagty | 7 gün |
| Tölegiň şerti | T / T. |
| Üpjünçilik ukyby | Jikme-jik sargyt esasynda |
